Press jaw F - F20/20mm IVAR.CEL F

Product detailed description

The press jaw F20/20mm is an essential tool for installers working with press-fitting systems in residential and commercial building projects. It is commonly used in heating, plumbing and sanitary applications where reliable, leak-free connections are required. This jaw is specifically designed for 20mm diameter copper or plastic pipes and is used in conjunction with IVAR.ALPEX press fittings. It ensures accurate and consistent pressing during installation, which is critical for maintaining system integrity and performance.

Installers working on central heating systems, domestic hot and cold water supply lines, or underfloor heating circuits will find this jaw suitable for its intended purpose. It is particularly useful in tight spaces or complex layouts where traditional soldering or threading methods are impractical. The jaw is designed for use with electrically powered hydraulic presses, ensuring precision and repeatability in each pressing operation.

Technical parameters

Installation and connection

During installation, the press jaw F20/20mm must be securely mounted in the pressing tool. The pipe and fitting must be aligned correctly before pressing. The jaw ensures even pressure distribution across the fitting, which is essential for forming a reliable connection. Installers should verify that the pipe is cut cleanly and that the fitting is seated correctly before initiating the pressing process. Common mistakes include misalignment of the pipe and fitting or using the wrong jaw size, which can result in a poor connection or damage to the components.

Compatibility and accessories

This press jaw is compatible with the IVAR.POWER-PRESS and IVAR.POWER-PRESS ACC electrically powered pressing tools. It is also designed to work with IVAR.ALPEX press fittings. For certain applications, additional accessories such as the IVAR.MC Z4 intermediate jaw or IVAR.TH 17 jaws may be required. Installers should ensure that all components are from the same system to maintain compatibility and system integrity.

Technical background for designers

The press jaw F20/20mm operates by applying hydraulic pressure to deform the press fitting around the pipe, creating a permanent and leak-free connection. The jaw is typically made from hardened steel to withstand repeated pressing operations without wear. The design ensures that the pressure is evenly distributed across the fitting, which is essential for maintaining the mechanical strength and sealing properties of the connection. The integration of the jaw into the pressing system allows for precise control of the pressing force and ensures that the connection meets the required standards for durability and performance.

Service and operation

Regular inspection of the press jaw is recommended to ensure that it remains in good working condition. Any signs of wear or damage should be addressed immediately to prevent compromised connections. The jaw should be kept clean and free from debris to ensure accurate pressing. No specific service intervals are provided, but it is advisable to follow the manufacturer's recommendations for maintenance and inspection.

Frequently asked questions

Can the press jaw F20/20mm be used with other IVAR press systems?
It is specifically designed for IVAR.ALPEX press fittings and is compatible with IVAR.POWER-PRESS and IVAR.POWER-PRESS ACC presses. It is not suitable for other press systems.

What is the maximum pipe diameter that can be used with this jaw?
The jaw is designed for 20mm diameter pipes. It is not suitable for larger or smaller diameters.

Is it possible to use this jaw with intermediate jaws?
Yes, the IVAR.MC Z4 intermediate jaw can be used in certain applications to extend the range of the pressing tool.

Can the jaw be used for both copper and plastic pipes?
Yes, the jaw is suitable for both copper and plastic pipes of the correct diameter and type.