T-piece PRESS-GAS, 32 x 32 x 32

Product detailed description

This T-piece is commonly used in gas piping systems for creating branch connections in heating and industrial applications. It ensures a secure, leak-free connection between three equal-diameter ALPEX-GAS pipes. The component is suitable for both indoor and outdoor installations where the operating conditions match the specified parameters. It is often found in commercial and residential buildings where gas supply lines need to be branched without compromising system integrity.

The design allows for straightforward installation using standard pressing tools compatible with ALPEX-GAS pipe systems. The material and construction are selected to withstand the mechanical and thermal stresses typical in gas distribution networks. It is important to follow the recommended installation procedures to maintain the performance and safety of the system over time.

Technical parameters

Material	Brass CW617N
Operating temperature	-20 °C
Nominal pressure	PN 10
Weight	0.416 kg
Code	512020GAS
Brand	IVAR

The operating temperature range of -20 °C to +60 °C makes this T-piece suitable for environments where the system is exposed to cold ambient conditions or heated fluid. The nominal pressure rating of PN 10 ensures compatibility with medium-pressure gas systems. These parameters are essential for determining correct sizing and suitability for the intended application.

Installation and connection

To install the T-piece, first ensure the ALPEX-GAS pipes are cut straight and cleaned of any burrs. Align the pipes with the T-piece ports and insert them fully. Use approved pressing tools to apply the required force evenly around the connection. Verify that the tooling matches the specified type for this component. Common errors include misalignment during insertion and insufficient pressing force, which can lead to leaks or premature failure. Always inspect the connection visually after pressing and perform a pressure test if required by local regulations.

Compatibility and accessories

This T-piece is specifically designed for use with ALPEX-GAS pipes of the same diameter. It requires pressing tools compatible with the specified tool type. No additional components are needed for basic installation. Ensure that all tools and accessories meet the manufacturer’s specifications for correct and safe use.

Technical background for designers

The T-piece operates by providing a fixed branch point in a gas piping system. The brass CW617N material offers good corrosion resistance and mechanical strength, making it suitable for long-term use in gas applications. The HNBR sealing material ensures a tight seal under operating pressure. Integration into the system should consider the overall pressure and temperature conditions to avoid stress concentrations. The service life depends on correct installation, material quality, and environmental factors such as exposure to moisture or vibration.

Service and operation

Routine inspection of the connection is recommended during scheduled maintenance. Check for signs of leakage, deformation, or corrosion. There are no defined service intervals for this component, but any visible damage should be addressed immediately. Ensure that the surrounding piping and fittings are also in good condition to maintain system reliability.

Frequently asked questions

Can this T-piece be used with other pipe types besides ALPEX-GAS?
No, it is specifically designed for ALPEX-GAS pipes and will not provide a secure connection with other pipe materials.

Is it compatible with pressing tools of other manufacturers?
Only if the tool type is compatible with the specified tool type. Always verify tool compatibility before use.

What is the maximum working pressure for this T-piece?
The maximum working pressure is PN 10 under normal operating conditions.

Can it be used in low-temperature environments?
Yes, it is rated for use down to -20 °C, making it suitable for cold environments provided the system is properly insulated.