Filter cartridge - activated carbon block; disposable - action IVAR.F10V

Product detailed description

Activated carbon block filter cartridges are commonly used in residential and commercial water treatment systems to remove suspended solids and particulate matter. Installers and service technicians working in plumbing, heating, and irrigation systems often integrate these filters into pre-treatment stages to protect downstream components such as pumps, valves, and heat exchangers. The cartridge is intended for use in 10-inch filter housings and is suited for applications where water quality requires basic mechanical filtration prior to more advanced treatment processes.

These filters are typically installed in domestic and light industrial water supply lines, irrigation systems, and in-line water purification units. They are designed to be used with a range of connection types and are compatible with standard filter housings. The operating conditions and material selection ensure that the filter can be integrated into a variety of system configurations without requiring extensive modifications.

Technical parameters

Material	PP
Operating temperature	+40 °C
Nominal pressure	PN 6
Code	IVAFCBL
Brand	IVAR

The nominal pressure rating of PN 6 indicates that the filter is suitable for use in low-pressure water systems, typically up to 6 bar. The maximum operating temperature of +40 °C means that the filter is not suitable for hot water applications. These parameters are essential for determining the correct filter for the intended system conditions and ensuring that the filter will perform reliably without degradation or failure.Installation and connection The filter cartridge is designed for installation in 10-inch filter housings. It includes connection sleeves for 1/2 inch, 3/4 inch, and 1 inch male threads, allowing for flexible integration into various piping systems. Installers should verify that the filter housing is compatible with 10-inch cartridges and that the thread sizes match the system requirements. The wall bracket included with the unit facilitates secure mounting in accessible locations. Common installation errors include incorrect thread orientation, failure to check for debris in the housing before insertion, and improper sealing of the housing lid. It is important to ensure that the filter is fully seated and that the housing is tightened to the manufacturer’s specifications to prevent leaks and bypass flow.Compatibility and accessories This filter is compatible with standard 10-inch filter housings. For different filtration media or performance requirements, alternative filter inserts from the F10 series can be used. Installers should ensure that the housing is rated for the same pressure and temperature conditions. Additional accessories such as filter housings, sealing rings, and mounting hardware may be required for a complete installation. The wall bracket and connection sleeves are included with this unit.Technical background for designers The filter operates by passing water through a block of compressed activated carbon, which captures mechanical impurities and particulate matter. The polypropylene construction ensures chemical resistance and durability in water treatment applications. The filter is designed for integration into low-pressure water systems and is suitable for use in pre-treatment stages. The service life and efficiency of the filter are influenced by the concentration of suspended solids in the feed water, the flow rate, and the frequency of maintenance. The maximum operating temperature of +40 °C limits its use in hot water systems.Service and operation The filter is a disposable unit and must be replaced when the filtration media becomes clogged or the pressure drop across the filter exceeds acceptable limits. There are no service intervals specified in the technical data, and the filter should be replaced based on system performance and visual inspection. During operation, installers should monitor for signs of reduced flow or increased pressure drop, which may indicate the need for replacement. The housing should be inspected for leaks and the sealing surfaces should be cleaned before reinstallation of a new cartridge.Frequently asked questions

Can the IVAFCBL filter be used in hot water systems?
No, the filter is rated for a maximum operating temperature of +40 °C and is not suitable for hot water applications.

What thread sizes are supported by the filter?
The filter includes connection sleeves for 1/2 inch, 3/4 inch, and 1 inch male threads, allowing for flexible installation options.

Is the filter compatible with 10-inch filter housings?
Yes, the filter is specifically designed for use in 10-inch filter housings and requires no modification for installation.

Can the filter be used with different types of filter media?
No, the IVAFCBL is a fixed-media filter with an activated carbon block. For different media, alternative filter inserts from the F10 series should be used.