Replacement container - for filters IVAR.FP3; 9 3/4" IVAR.PRISLUSENSTVI

Product detailed description

Replacement filter containers are essential components in drinking water treatment systems, particularly in residential and commercial buildings where water quality is a priority. Installers and service technicians commonly use these units in pre-treatment stages before reverse osmosis or carbon filtration systems. The transparent polypropylene bowl allows for visual inspection of the filter media and ensures easy identification of clogging or contamination. The container is designed for use with 9 3/4 inch filter cartridges, which are available in various heights to accommodate different filtration requirements.

These containers are often installed in utility rooms, kitchens, or dedicated water treatment areas. They are typically connected to the mains water supply or to a pre-filtration manifold. The system is designed to remove mechanical impurities such as sand, silt, and rust particles, ensuring that downstream equipment is protected from abrasive wear and clogging. The container is not supplied with a filter cartridge, allowing users to select the appropriate media for their specific application.

Technical parameters

Material	filter head PP with brass cap
Operating temperature	+50 °C
Nominal pressure	PN 8
Diameter	122 mm
Code	A6040160
Brand	IVAR

The operating temperature limit of +50 °C ensures compatibility with most domestic water systems, including those with solar heating or heat exchangers. The nominal pressure rating of PN 8 means the container is suitable for standard municipal water supplies and low-pressure systems. The diameter of 122 mm is consistent with standard 9 3/4 inch filter cartridges, ensuring proper fit and sealing. These parameters are critical for correct system sizing and selection, particularly in multi-stage filtration setups where pressure drop and flow rate are important considerations.

Installation and connection

The container is installed using standard pipe connections and is typically connected to the water supply via 3/4 inch, 1 inch, or larger threaded fittings, depending on the selected filter cartridge. The polypropylene construction allows for installation in both hot and cold water lines, provided the temperature remains within the specified limit. During installation, it is important to ensure that the sealing surfaces are clean and free from debris to prevent leaks. A common mistake is incorrect tightening of the cap, which can lead to pressure loss or contamination ingress. The brass cap should be tightened by hand or with a wrench, taking care not to over-tighten and damage the threads.

Compatibility and accessories

This container is specifically designed for use with IVAR FP3 filter systems and is compatible with 9 3/4 inch filter cartridges of varying heights. When ordering, it is important to ensure that the selected cartridge matches the container's internal dimensions and connection type. Accessories such as sealing rings, mounting brackets, and pressure gauges may be required depending on the system configuration. As the container is supplied without a filter cartridge, users must order the appropriate media separately to suit their filtration needs.

Technical background for designers

The operating principle of this container is based on mechanical filtration, where suspended particles are retained by the filter media housed within the polypropylene bowl. The transparent design allows for visual monitoring of the media condition, which is important for determining service intervals. The polypropylene material is chemically inert and resistant to most common water contaminants, including chlorine and chloramines. The brass cap provides a durable and corrosion-resistant sealing surface, ensuring long-term reliability. The system is integrated into the water supply via standard threaded connections and is typically installed upstream of more sensitive filtration stages to protect them from particulate damage. The service life and efficiency of the system are influenced by the quality of the filter media, the flow rate, and the frequency of maintenance.

Service and operation

Regular inspection of the container is recommended to ensure that the filter media is functioning correctly and that there are no signs of wear or contamination. The transparent bowl allows for visual checks without the need to disassemble the unit. If the media becomes clogged or contaminated, it should be replaced according to the manufacturer's guidelines. No specific service intervals are provided in the brief, so users should refer to the technical data sheet for the selected filter media. During operation, it is important to monitor the pressure drop across the container to ensure that it remains within acceptable limits. Excessive pressure drop may indicate that the media needs to be replaced or cleaned.

Frequently asked questions

Can this container be used with filter cartridges of different heights?
Yes, the container is compatible with 9 3/4 inch filter cartridges of varying heights, including 3/4 inch, 1 inch, 5/4 inch, and 6/4 inch options.

Is this container suitable for hot water applications?
Yes, the container is rated for a maximum operating temperature of +50 °C, making it suitable for use in hot water systems within this temperature range.

Can this container be used in high-pressure water systems?
No, the container is rated for a nominal pressure of PN 8, which is suitable for standard municipal water supplies and low-pressure systems.

Is the container compatible with other brands of filter cartridges?
It is specifically designed for use with IVAR FP3 filter cartridges. Using cartridges from other brands may affect performance and sealing integrity.