Straight Heated Towel Rail 500 x 1340

Product detailed description

This heated towel rail is commonly installed in residential and commercial bathrooms, utility rooms, and other spaces requiring supplementary heating and textile drying. It integrates with central heating systems using PEX-AL-PEX 16 x 2 pipe and can also be used with electric heating coils. Installers should ensure correct mounting orientation and verify compatibility with existing pipework and electrical systems.

The design allows for efficient heat distribution and textile drying while maintaining a compact footprint. The unit must be mounted vertically due to structural constraints. It supports both hot water and alternative heat transfer media, making it suitable for a range of heating configurations.

Technical parameters

The thermal exponent of 1.2908 and water volume of 6.0 L are essential for calculating heat output in different installation scenarios. The maximum operating pressure of 1.0 MPa and test pressure of 1.5 MPa define the mechanical limits. The recommended PEX-AL-PEX 16 x 2 pipe ensures proper flow rates and system integrity.

Installation and connection

Mounting requires the supplied installation kit, which includes four plastic holders, mounting consoles, vent plugs and washers. Connect to the heating system using 1/2 inch internal thread fittings. Ensure vertical alignment during installation since horizontal mounting is not supported. Verify that the coil connection is accessible and that the system is properly vented. Common errors include incorrect pipe sizing and failure to account for expansion in the system.

Compatibility and accessories

This model is compatible with central heating systems using hot water or non-freezing mixtures. For electric operation, an external 400 W coil must be purchased separately. The recommended pipe type is PEX-AL-PEX 16 x 2. Additional components such as connecting fittings and vent valves should be sourced separately.

Technical background for designers

The operating principle relies on convective heat transfer from the heated pipes to the surrounding air and textiles. The low-carbon steel construction offers good thermal conductivity and durability. The 20 mm diameter pipes ensure sufficient flow for effective heating. System integration depends on the type of circulation—forced or gravity-based. Long-term efficiency is affected by water quality, regular venting and proper insulation of connecting pipes.

Service and operation

Periodic checks should include verifying the absence of leaks, ensuring proper venting and confirming that the coil is correctly installed if used. The lacquer coating provides corrosion resistance, but regular visual inspections are recommended. There are no specified service intervals in the technical documentation.

Frequently asked questions

Can the electric coil be installed on both sides of the radiator?
Yes, the design allows for coil installation on either side of the unit.

Is it possible to install the radiator horizontally?
No, the model is designed exclusively for vertical installation.

What type of pipe is recommended for connection?
A PEX-AL-PEX 16 x 2 pipe is recommended for optimal performance and compatibility.

What is the maximum allowable working pressure?
The maximum operating pressure is 1.0 MPa, as specified in the technical parameters.