T-piece 42 x 42 x 42

Product detailed description

This 90° T-piece is a key component in press-fit pipe systems, commonly used in closed heating systems, fire protection, industrial gas lines, and compressed air installations. It is designed for use in both residential and commercial buildings, where reliable and quick installation is essential. The component is suitable for applications involving hot and cold water, inert gases, and industrial fluids. It is not certified for potable water use.

As an installer or technician, you will encounter this T-piece in central heating systems, chilled water circuits, and fire suppression systems. It is particularly useful in situations where a branch connection is needed at a right angle. The component is designed for use with press-fit tools and is intended for use in systems operating within the specified temperature and pressure ranges.

Technical parameters

Material	carbon zinc-coated steel
Operating temperature	-20 °C
Nominal pressure	PN 16
Resistance to high pressures up to	16 bar
Weight	0.27 kg
Code	IVC40.42
Brand	IVAR

The T-piece is rated for a nominal pressure of PN 16, meaning it can handle pressures up to 16 bar. It is suitable for operation in environments with temperatures ranging from -20 °C to +120 °C. These parameters are essential for selecting the correct component for a given system and ensuring compatibility with the operating conditions of the installation.Installation and connection The T-piece is installed using press-fit technology, which eliminates the need for welding or threading. The connection is made by inserting the pipe into the fitting and using compatible pliers to compress the joint. The correct pliers type must be used to ensure a secure and leak-free connection. The component is designed for use with pipes of the same diameter, and the installation must be checked for proper compression and alignment. Common installation errors include using incorrect pliers, failing to compress the joint fully, or using the component in systems that exceed the specified temperature or pressure limits.Compatibility and accessories This T-piece is compatible with other press-fit components from IVAR, including pipes, elbows, and couplings. It is designed for use with carbon zinc-coated steel pipes and requires compatible press-fit tools for installation. When ordering, ensure that the correct pliers and any additional fittings are included. Accessories such as press-fit couplings and elbows may be needed to complete the installation, depending on the system layout.Technical background for designers The T-piece operates by creating a branch connection in a pipe system using a press-fit joint. The material, carbon zinc-coated steel, provides corrosion resistance and mechanical strength. The EPDM O-ring ensures a tight seal and prevents leakage. The component is integrated into the system by connecting it to press-fit pipes and compressing the joint with the correct pliers. The service life and efficiency of the component depend on proper installation, correct operating conditions, and the quality of the press-fit connection.Service and operation The T-piece requires minimal maintenance once installed correctly. Regular visual inspections should be carried out to check for signs of wear, corrosion, or leakage. The press-fit joint should remain intact and free from damage. If any issues are detected, the component should be replaced immediately. No specific service intervals are provided in the technical documentation, but periodic checks are recommended to ensure continued performance.Frequently asked questions

Can this T-piece be used in a solar heating system?
Yes, the T-piece is suitable for use in solar heating systems, provided the operating conditions remain within the specified temperature and pressure limits.

Is this T-piece compatible with other brands of press-fit tools?
It is recommended to use IVAR-compatible pliers to ensure a secure and leak-free connection. Using non-compatible tools may result in an improper press-fit.

Can this T-piece be used in a fire protection system?
Yes, the T-piece is suitable for use in fire protection systems, including sprinkler systems, as long as the installation complies with the relevant standards and specifications.

Is this T-piece suitable for use with inert gases?
Yes, the T-piece can be used with inert gases, provided the system operates within the specified pressure and temperature ranges.