Replacement container - for filters IVAR.FP3; 20" IVAR.PRISLUSENSTVI

Product detailed description

Replacement containers are essential components in potable water filtration systems where mechanical impurities must be removed before distribution. Installers working in residential, commercial or industrial water supply systems often need to replace worn or damaged filter housings during routine servicing. These systems typically include point-of-entry filtration solutions, where water is treated before reaching taps, appliances or storage tanks. Proper housing ensures the filter cartridge functions effectively and maintains system hygiene.

The IVAR FP3 replacement container is specifically engineered for integration with existing IVAR FP3 filter systems. It is commonly found in installations where water quality requires regular monitoring and mechanical filtration. The transparent polypropylene body allows visual inspection of the filter media and flow characteristics, supporting preventive maintenance. The housing must be correctly sized and selected based on system pressure and temperature conditions to ensure long-term reliability.

Technical parameters

Installation and connection

Installation begins with system shutdown and isolation of the water supply. The old filter housing is removed by disconnecting the inlet and outlet connections, which are typically 3/4 inch, 1 inch, 5/4 inch or 6/4 inch threaded fittings. The new housing is mounted using the same thread size and orientation, ensuring correct alignment with the piping. A sealing ring should be checked for wear and replaced if necessary to prevent leaks.

Common installation mistakes include incorrect thread orientation, failure to clean the sealing surface, and over-tightening the housing, which can damage the polypropylene body or gasket. After installation, the system should be repressurized slowly to check for leaks at all connections. The transparent housing allows for immediate visual confirmation of water flow and filter media condition after startup.

Compatibility and accessories

This container is compatible with standard 20-inch filter cartridges designed for mechanical filtration of potable water. To complete the system, installers must order separate filter cartridges and sealing rings appropriate for the application. Additional components such as shut-off valves, bypass systems or pressure gauges may also be required depending on the system configuration.

Technical background for designers

The operating principle involves containing the filter cartridge within a sealed housing to ensure all water passes through the filter media. The polypropylene body offers chemical resistance and dimensional stability across a wide range of water qualities. The brass cap provides durability and resistance to corrosion in wet environments. For integration into the system, the housing must be positioned to allow easy access for cartridge replacement and inspection. System efficiency depends on correct cartridge selection, proper flow rates and regular maintenance to prevent clogging and pressure loss.

The service life of the housing is affected by exposure to UV light, chemical concentrations in the water and mechanical stress during installation. To maximize longevity, avoid repeated disassembly and ensure all connections are properly tightened but not over-torqued.

Service and operation

Regular inspection of the housing is recommended to identify signs of wear, cracks or deformation. The transparent body allows early detection of internal contamination or leakage. While the brief does not specify service intervals, it is good practice to inspect the housing annually or following any system pressure surge. When replacing the filter cartridge, always check the condition of the sealing ring and housing threads for damage.

Frequently asked questions

Can the IVAR FP3 container be used with third-party 20-inch filter cartridges?
Yes, provided the cartridges are mechanically compatible with the housing dimensions and sealing requirements.

Is the housing suitable for hot water applications?
The housing is rated for operating temperatures up to +50°C, making it suitable for lukewarm water systems but not for high-temperature applications.

What thread sizes are available for this housing?
Available models include 3/4 inch, 1 inch, 5/4 inch and 6/4 inch thread sizes to match system piping configurations.

Can the housing be cleaned manually?
Yes, the transparent polypropylene body allows for visual cleaning with a soft cloth and mild detergent. Avoid abrasive materials that could scratch the surface.